Seamless Indoor Air Disinfection Through Innovative Cold Fogging (Aerosolization)
Wherever surfaces are cleaned or mold damage is remediated, an invisible problem arises: wiping, brushing, or air currents kick up millions of microscopic germs and toxic mold spores. The indoor air of contaminated rooms shows extremely high spore concentrations, especially after mechanical remediation, which can penetrate deep into the lungs via the respiratory tract. DESINFECT FOGGING closes this hygiene gap. As a ready-to-use special solution for cold fogging devices, it disinfects the entire room volume and all hard-to-reach surfaces in a single, automated step.
The product is based on an advanced, stabilized active chlorine formula. When deployed as an ultra-fine mist (aerosolization), the active ingredients remain suspended in the air for an extremely long time. These fine aerosols envelop airborne particulates and pathogens directly in the air, sediment them, and kill them instantly and reliably upon contact (3D room disinfection).
The Superior Advantage Over Hydrogen Peroxide (H₂O₂), Ozone, and Alcohol
In practice, classic methods often reach economic and safety-related limits. DESINFECT FOGGING offers the decisive edge here:
-
No Material Damage (vs. Hydrogen Peroxide): Hydrogen peroxide (H₂O₂) is extremely corrosive and bleaching. It attacks sensitive electronics, causes plastics to become brittle, and bleaches textiles or surfaces. Our active chlorine formula is completely pH-neutral and behaves in an absolutely material-gentle manner.
-
Immediate Re-entry (vs. Ozone): Ozone treatments require lockdowns lasting several days because the gas is highly toxic and breaks down very slowly. After cold fogging with DESINFECT FOGGING, the room only needs to be ventilated briefly and is immediately safe to use again.
-
No Risk of Explosion (vs. Alcohol): Fogging alcohol-based agents is strictly prohibited in enclosed spaces due to the enormous risk of explosion (explosion protection regulations). Our purely mineral solution is non-flammable and completely explosion-proof.
Massive Cost, Time, and Labor Savings for Your Business
For remediation companies, building cleaners, the hotel industry, and industrial sectors, using DESINFECT FOGGING is a true economic game-changer:
-
Substantial Labor Savings: Instead of several employees spending hours painstakingly wiping down every surface, crack, cable duct, and ceiling tile by hand, a single employee sets up the cold fogging device, starts the program, and leaves the room. The room practically disinfects itself.
-
Enormous Time Savings: The aerosols distribute evenly throughout the entire room volume within minutes and reach even inaccessible areas that could never be reached manually. The working time per room shrinks from hours to a few minutes.
-
Minimized Downtimes & Maximum Yield: Due to the extremely short exposure times and the rapid re-entry of the rooms, operational interruptions are reduced to an absolute minimum. Hotel rooms, production halls, or offices can be fully utilized again on the very same day. This drastically lowers remediation costs and increases your margin.
Your Benefits at a Glance
-
Comprehensive 3D Hygiene: Reaches inaccessible corners, cracks, ceiling areas, and the entire indoor air due to the fine active ingredient mist.
-
Highly Efficient Spore Elimination: Kills suspended mold spores, viruses, and bacteria directly in the air – the perfect complement after using DESINFECT MOLDEX.
-
Sustainable Odor Neutralization: Permanently eliminates musty odors from fire, mold, or decay through targeted oxidation, instead of just masking them.
-
Maximum Application Safety: pH-neutral and completely label-free according to GefStoffV – no hazard symbols, no toxic or corrosive residues.
-
Pure Professional Formula: Free from fragrances, dyes, surfactants, or volatile organic compounds (VOCs).
Delivery Form
-
Packaging: Handy round bottle, white (optimal for direct filling of fogging devices).
-
Packaging Unit (PU): 1 x 5 Liter (ready-to-use solution).
Dosage & Application Instructions
For safe and comprehensive indoor air remediation, the following procedure is recommended:
- The preparation is used undiluted and filled directly into the tank of a suitable cold fogging device (e.g., ULV fogger or ultrasonic fogger).
- Before application, close all windows and doors of the room to be treated completely. Switch off air conditioning and ventilation systems.
- Position the device in the room and start it. The required amount of liquid depends on the room volume (cubic meters) and the specifications in the technical product data sheet.
- Do not enter the room during the active fogging process and the subsequent exposure time without appropriate protective equipment (respirator mask).
- After the recommended exposure time has elapsed, ventilate the room thoroughly until the mist has completely cleared. All remaining mineral residues are entirely harmless.
Important Legal Notices:
Use biocidal products with care. Always read the label and product information before use. Keep out of reach of children.
BAuA Number: N-105773
| Item information |
Value |
| Liquid quantity / Volume: |
5 L |
| Shipping weight: |
5,70 kg
|
| Item weight: |
5,20 kg
|
| Content: |
5,00 l
|
| Dimensions
( Length × Width × Height ):
|
14,00 × 20,00 × 30,00 cm |
Product safety information
Manufacturer information:
Z|R|T ZiMMER Reinigungstechnik GmbH
Raiffeisenstr. 6
Hettstadt, Deutschland, 97265
shop@zimmer-reinigungstechnik.de
https://www.zimmer-reinigungstechnik.de
