Sustainable Mold Remediation in the Modern Age of Energy Saving
In the wake of modern thermal insulation, windows and doors in residential buildings today often seal so tightly that natural air exchange is greatly reduced. The inevitable consequence of insufficient ventilation: moisture accumulates and dangerous mold forms. Mold damage is far more than just a visual blemish. In the long run, it poses a serious threat to health and is considered a primary trigger for respiratory diseases, chronic coughing, and allergies. DESINFECT MOLDEX Anti-Schimmel-Spray tackles the problem directly at the root.
The spray is based on a highly effective active ingredient solution stabilized with active chlorine from hypochlorous solution. This ultra-pure mode of action kills the mold as well as its mycelia instantly upon contact. Since the formula works completely safely and with low residues, it is also used in an identical composition within the sensitive food industry.
User-Friendly, Label-Free, and pH-Neutral
Forget highly corrosive, strongly alkaline chlorine bleaches that destroy wallpaper, attack wood, and release toxic fumes. DESINFECT MOLDEX is completely pH-neutral, purely vegan, and free from perfumes or artificial auxiliary agents. An unbeatable advantage for application in living rooms, bedrooms, or children's rooms: The product is absolutely label-free according to the Hazardous Substances Ordinance (GefStoffV) and requires no hazard symbols. No aggressive fumes are generated during application, which protects the indoor climate.
Expert tip for maximum room safety: Mechanical removal of the mold after the exposure time often inevitably kicks up invisible, toxic spores. The indoor air shows an increased spore load especially after remediation. Through complementary room fogging with DESINFECT FOGTEC, even the airborne spores can be completely eliminated using the same safe mode of action.
Your Benefits at a Glance
-
Universal Application: Reliable effect on almost all common substrates such as plaster, masonry, tiles, joints, and wood.
-
Respiratory Protection: Destroys mold and stops the production of new, allergenic spores.
-
Gentle Professional Formula: pH-neutral, gentle on materials, and without the typical pungent long-term chlorine odor of conventional cleaners.
-
100% Label-Free: No hazard warning symbols required according to GefStoffV – absolutely safe in handling and storage.
-
Pure Composition: Free from fragrances, dyes, aldehydes, alcohols, and surfactants.
Delivery Form
-
Packaging: Handy round bottle, white (ready for spray attachments).
-
Packaging Unit (PU): 1 x 5 Liter (ready-to-use solution).
Dosage & Application Instructions
For safe and deep-acting mold remediation, the following procedure is recommended:
- The preparation is used undiluted. Do not brush off affected areas beforehand to prevent the spores from being kicked up before disinfection.
- Spray the infested surfaces fully and thoroughly with DESINFECT MOLDEX.
- Allow the product sufficient time to take effect. The recommended exposure time is 2 to 6 hours depending on the severity of the infestation.
- After the exposure time, the killed infestation can be mechanically removed by careful wiping (with a damp cloth) or brushing. Wearing a face mask is recommended during this work.
- Mineral surfaces (such as plaster or masonry) should be treated with a suitable anti-mold paint after they have dried completely.
Important Legal Notices:
Use biocidal products with care. Always read the label and product information before use. Keep out of reach of children.
BAuA Number: N-105779
| Item information |
Value |
| Item weight: |
1,00 kg
|
| Content: |
5,00 l
|
Product safety information
Manufacturer information:
Z|R|T ZiMMER Reinigungstechnik GmbH
Raiffeisenstr. 6
Hettstadt, Deutschland, 97265
info@zimmer-reinigungstechnik.de
https://www.zimmer-reinigungstechnik.de